Operation Procedure

Don’t cancel the function of the safety gate at will for the sake of convenience. Pay attention to the temperature of the pressure oil, the oil temperature should not exceed the specified range. The ideal working temperature of hydraulic oil should be maintained between 45-50 ℃, generally within the range of 35-60 ℃ is more appropriate. Pay attention to the adjustment of each travel switch to avoid the machine in the action of the impact. End of work After the operation of the injection molding machine, the barrel should be cleaned up the plastic, to prevent the leftover material oxidation or long-term thermal decomposition. The mold should be opened, so that the elbow lever mechanism time in a closed state. The workshop must be equipped with lifting equipment. When loading and unloading the mold should be very careful to ensure production safety.  

阅读更多 »

Operating Points

Before starting the machine Before the operation of the injection molding machine, check whether there is water or oil in the electrical control box, and do not start the machine if the electrical appliances are damp. There should be maintenance personnel to blow dry the electrical parts before starting the machine. Before the operation of the injection molding machine, check whether the power supply voltage is in line with the general should not exceed ± 6%. Operation of injection molding machine Check whether the emergency stop switch, front and rear safety door switches are normal. Verify whether the rotation direction of motor and oil pump is the same. Check whether the cooling pipes are long distance and smooth, and pass cooling water to the oil cooler and the cooling water jacket at the end of the barrel. Before the operation of the injection molding machine, check whether there is lubricating oil in each movable part, and add enough lubricating oil. 6.Turn on the electric heat and heat each section of the barrel. When the temperature of each section to meet the requirements, and then hold a period of time in order to stabilize the temperature of the machine. Holding time varies according to the requirements of different equipment and plastic raw materials. Add enough plastic in the hopper. According to the requirements of injection molding of different plastics, some raw materials are best to be dried first. Cover the heat shield on the barrel of the machine, which can save

阅读更多 »

The energy saving of injection molding machine can be divided into two parts: one is the power part and the other is the heating part.

The energy saving of injection molding machine can be divided into two parts: one is the power part and the other is the heating part. Power part of the energy saving: most of the use of frequency converter, energy saving is through the saving of the motor of the remaining energy consumption, such as the actual power of the motor is 50Hz, and you actually only need 30Hz in production is enough to produce, those excess energy will be wasted, the frequency converter is to change the power output of the motor to achieve the effect of energy saving. Heating part of the energy-saving: heating part of the energy-saving mostly electromagnetic heaters are used to save energy, the energy saving rate is about 30% -70% of the old resistance circle. Compared with resistance heating, electromagnetic heaters have more than one layer of insulation, heat utilization increased. Compared with resistance heating, electromagnetic heaters act directly on the material tube heating, reducing the heat transfer heat loss. Compared with resistance heating, electromagnetic heater heating speed is faster than a quarter, reducing the heating time. Compared with resistance heating, electromagnetic heater heating speed, productivity is improved, so that the motor is in a saturated state, so that it reduces the high power low demand caused by power loss. The above four points are flying as electromagnetic heaters, why can be in the injection molding machine energy saving up to 30% -70% of the reason!

阅读更多 »

Two-color injection molding machine

Two-color injection molding machine Can be a one-time injection molding two colors of injection molding machine, can meet the consumer requirements for the appearance, can make the user to use the product more comfortable. Multi-position molding machine Its injection device and mold closing device have two or more working positions, or the injection device and mold closing device can be arranged in various ways. Electric Injection Molding Machine All-electric injection molding machines not only meet the needs of special applications, but also have more advantages than ordinary injection molding machines. Another advantage of fully electric injection molding machines is the reduction of noise, which not only benefits the workers, but also reduces investment construction costs in soundproof production plants.

阅读更多 »

Angle Injection Molding Machine

The axis of the injection screw and the axis of movement of the template of the mold clamping mechanism of the corner injection molding machine are arranged perpendicular to each other, and its advantages and disadvantages are between the vertical and horizontal types. Since the injection direction and the parting surface of the mold are in the same plane, the corner injection molding machine is suitable for non-symmetrical geometrical molds with side gates or for products where the molding center does not allow any trace of the gate. As shown in the figure “Angle type injection molding machine”.

阅读更多 »

Horizontal injection molding machine

Even for large-sized machines, there is no height restriction for the plant where they are placed due to the low body of the machine. Corner injection molding machine 2、It is possible to realize automatic molding without the use of robot when the product can be dropped automatically. 3、Due to the low body, it is convenient to supply materials and easy to overhaul. 4、Molds need to be installed by crane. 5、Multi-sets arranged side by side, molded products can be easily collected and packaged by conveyor belt.

阅读更多 »

    Duxia Industry has a very strong support team and  we will usually reply to you within a working day.Please make sure that the email and cellphoneinformation you filled in is correct, otherwise we willnot be able to contact you and give you a quotation.

Contact Us

small_c_popup.png

Let's have a chat

Leave your information, our sales will contact ASAP!