Facebook
Twitter
LinkedIn

Vertical Injection Molding Machine

  1. The injection unit and clamping unit are located on the same vertical centerline, and the mold is opened and closed in the up and down direction. The footprint is only about half that of a horizontal machine, so it is about two times more productive when converted to floor space.
  2. It is easy to realize insert molding. Because the surface of the mold is facing upward, it is easy to put the insert into the positioning. If the lower mold plate is fixed and the upper mold plate is movable, and if the belt conveyor is combined with a robot, fully automatic insert molding can be easily realized.

3、The weight of the mold is supported by the horizontal template for up and down opening and closing action, and the phenomenon that the template cannot be opened and closed due to the forward fall caused by the gravity of the mold similar to the horizontal machine will not occur. It is helpful to keep the precision of machine and mold permanently.

4, through a simple manipulator can take out each plastic part cavity, is conducive to precision molding.

5, general clamping device around the open, easy to configure all kinds of automation devices, adapted to complex, delicate products automatic molding.

6、Pulling the belt conveyor device is easy to realize the string installed in the middle of the mold, easy to realize the molding automatic production.

7、It is easy to ensure the consistency of resin fluidity and mold temperature distribution in the mold.

8、Equipped with rotating table, moving table and tilting table, it is easy to realize insert molding and in-mold combination molding.

9, small batch trial production, the mold structure is simple and low cost, and easy to unload.

10, withstood the test of many earthquakes, vertical machine due to the low center of gravity, compared with the horizontal machine seismic resistance is better.

Contact us

small_c_popup.png

Let's have a chat

Leave your information, our sales will contact ASAP!